$ 29 – Buy Now
Augvape Intake RTA
The Augvape Intake 24mm RTA refers to a reconstructable idea, which was brought up by Mike Vapes and Augvape. It features a convenient top fill system containing big fill ports, easy to construct deck and an expandable juice capacity.
It is easier to increase the Augvape Intake RTA standard capacity of 2.5 ml to 4.2 ml by use of the bubble glass thanks to its expandable eLiquid capacity feature.
Its spacious build deck does play home to two posts that host a single 3mm terminal in each post ensuring the efficient configuration of the single coil.
The flow of air is made possible by the adjustable dual airflow at the top. The air is directed down under the coil and grouped into three different individual outlets. This Augvape Intake 24mm RTA also comprises of a simple yet effective top fill system that functions when one press and turns the cap top ¼ in the clockwise direction, thus enabling the cap top to pop off and reveal two fill ports that are oversized.
Main Features of the Augvape Intake 24mm RTA
Just as its name suggests, the main feature of the Augvape Intake 24mm RTA is its airflow that has two hollow tubes responsible for taking in air from top channeling it to the bottom before it bounces slamming on the coils heading upwards.
Leak Proof RTA
The design of Augvape Intake 24mm makes it leak proof. It contains a 2.5 ml e-liquid on the out of the box. You can always switch out by use of 4.2 ml bubble glass. The process of filling is very simple and can be compared to unscrewing the cap top revealing two smallish kidney shaped fill ports.
You will still not encounter any issues since both the post holes are open on the side making placement of the coil a doddle.
Components of Augvape Intake 24mm RTA
The Augvape Intake 24mm RTA comes with only one screwdriver hence you don’t have to spend extra money buying screwdriver. It comes with the x2 810 drip tips one blue which is of a lower profile, black which is chunkier and 510 adaptor. It also comes with one spare glass tube and an extra spare part bag just in case the initial one get torn and a user manual to help on know how to use and understand the Augvape Intake 24mm better.
It is advisable that whenever you are using the Augvape Intake RTA, you first wash and thoroughly clean all the atomizers with great care. One also needs to exercise a great sense of knowledge whenever they are handling or using the Augvape Intake 24mm RTA.
Before you use the Augvape Intake 24mm RTA with any of your devices or mods, it is recommended that you first test the coils using your ohm meter. However, you need first to ensure that the batteries, devices and mods are capable of handling low resistance before you start using them.
$ 29 – Buy Now
- Diameter: 24mm
- Build Support: Single-Coil
- 4.2ml Bubble Tank Capacity
- 2.5ml Standard Tank Capacity
- High Capacity Tank Reservoir
- Quarter Turn Top
- Two Large Fill Ports
- Two Post Single Terminal Build Deck
- Single Coil Design
- Single Terminal
- Side Mounted Hex Screws
- Top Mounted Philips Screws
- 3mm per Terminal
- Corner Wicking Cutouts
- PEEK Insulation
- Dual Adjustable Top Airslots
- 10mm by 3mm Each Airslot
- Fully Closeable
- 8mm Wide Bore Delrin 810 Drip Tip
- 304 Stainless Steel and Glass Construction
- Gold Plated 510 Contact
- Product Specifications: 50.5mm by 24mm
One Augvape Intake 24mm RTA
One Glass Tube
One 510 Adapter
One Spare Parts Bag