- 33%

Geekvape H45 Aegis Hero 2 Pod Mod Kit| 45W 1400mAh 4mL

Add to wishlistAdded to wishlistRemoved from wishlist 1

$ 30

Cheap Vape Deals On Geekvape H45 Aegis Hero 2

Geekvape H45 Aegis Hero 2 45W Pod Mod Kit

Featturing the Geek Vape H45 Aegis Hero 2 45W Pod Mod Kit, which utilizes Geek Vape B Series Coils and has an inbuilt 1400mAh battery with a 5-45W output range. The chassis of the Aegis Hero 2 Pod Kit is thin and portable without compromising performance since it is made of sturdy zinc alloy.

The Aegis Hero 2 Kit, which draws energy from an inbuilt 1400mAh battery, is excellent for all-day vaping and can release mouthwatering taste and vapor from your preferred e-liquid or nicotine salt, housed in the 4mL refillable pod. The Aegis Hero 2’s IP67-rated construction makes it resistant to dust, water, and moisture penetration, safeguarding the internal processor from damage.


The hero 2 kit is one of the tiniest in the Aegis series, which is composed of tiny yet strong pod systems.

It has a height of less than 122mm and a width that allows for pocket storage. This, however, is 40mm higher than the original. The increased length does make it a little more comfortable to handle since the cushioned grip has greater surface area.

Also updated is the screen, which now sports a 0.96-inch TFT Display. Setting changes are significantly simpler to make while using the menu. Additionally, additional features are visible at a glance.

Hero 2 Kit Performance

This pod system has USB-C quick charging as well as a bigger battery. This implies that the recharging process won’t take very long.

The 1400mAh battery has sufficient power for the majority of vapers. However, you may be required to plug in the charger whenever it is practical if you are the kind of person that vapes continuously at a high power. It has two coils with various resistances that can run between 15 and 35W and can produce up to 45W as well. These attach to the pod’s base via a push-fit connector.

The best e-liquid to use with this kit is 50/50. The coils’ decent wicking pores allow them to quickly absorb it. Additionally, the wattage range is appropriate for MTL and DL vapers.

Effortless Use

This kit is as simple to use as the M100 and S100 devices that were introduced back in 2021 thanks to the redesigned display. To keep the user informed, the screen displays all of the crucial settings. Additionally, it is simple to browse using the buttons below.

Simple refills may be made using the top fill pod without removing it from the machine. For those that need to fill up their tank while on the road, this is fantastic.


The Hero 2 pod kit is appropriate for both mouth to lung and direct lung vapers, as was previously noted.

For cloud chasing, the 0.4ohm coil can be used with 50/50 and shortfill e-liquid and performs best between 25 and 35W. The 0.6ohm coil, on the other hand, is more suited to limited DL or MTL vapers who desire more vapor and the standard pen type kit. For optimal performance, use 50/50 e-liquid with a power range of 15–25W.

Overall, the GeekVape Aegis Hero 2 pod kit is a significant improvement over the first model. The taste is still fantastic. However, aficionados of the original may not like the modest size increase. This is offset by a bigger battery and more comfortable grip. Additionally, the USB-C connector reduces the amount of time needed to recharge.

This is a nice next step for individuals wishing to upgrade from a beginner kit. This could resemble the Aegis Solo more closely in terms of size and look for fans of the original. So, I would suggest the S100 if you want to upgrade to something more powerful.


  • 0.6ohm B Coils
  • Two Adjustment Buttons
  • Geek Vape B Coil Series
  • Type-C USB Cable
  • Wattage Output Range: 5-45W
  • 4mL Pod Capacity
  • Voltage Output Range:
  • Resistance Range: 0.1-2.0ohm
  • 0.96″ TFT Display Screen
  • Top Airlfow Control Ring
  • Resistant to Dust, Water, and Shock
  • 0.4ohm B Coils
  • Zinc-Alloy Chassis Construction
  • Intuitive Firing Button
  • Integrated 1400mAh Battery
  • Bottom Fill System – Silicone Stoppered
  • Magnetic Pod Connection
  • IP67 Rating
  • Press Fit Coil Installation
  • Dimensions – 91.05mm by 43.1mm by 28.6mm
  • 510 Drip Tip

Package Contents

  • 1 x 0.4ohm B Series Coil
  • 1 x Coil Tool
  • 1 x H45 Pod
  • 1 x 0.6ohm B Series Coil
  • 1 x H45 Mod
  • 1 x Type-C USB Cable

internalTags:metax : nodesc : ppc0 : xnips: xnobodylinks : xline0012272022 : VSEX0012272022

Compare items
  • Total (0)