- 46%

Suorin Drop 2 Pod System Kit | 1000mAh 3.7mL

Add to wishlistAdded to wishlistRemoved from wishlist 1

$ 19

Cheap Vape Deals On Suorin Drop 2 Pod System

Suorin Drop 2 Pod System

The Suorin Drop 2 Pod Kit is a stable wattage (14W max) Mouth To Lung (MTL) device that uses a refillable but non-replaceable coil pod and an internal battery that can be recharged to 1000mAh. The Drop 2 is small and, as its name implies, has the appearance of a droplet of water. Its dimensions are just 78.8mm (H) x 52mm (W) x 17.8mm (D).

It is made of zinc alloy and PCTG material with an oval-shaped edge and is finished with a design using in-mould labeling (IML) on both side surfaces. Around this alloy band are the two fixed airflow pin holes, Type C charging port, On/Off button, and four distinct tiny holes with white LEDs below.

Six distinct color and pattern design possibilities are now available.

Drop 2 Pods

The Drop 2 replacement pod is refillable and has a 3.7ml (2ml if marketed in the EU) capacity for e-liquid. The package also includes a 1.0ohm pod. These pods have a bottom fill design and are constructed of semi-transparent smoked black PCTG material, allowing users to see the amount of e-liquid within each one.


The onboard processor of the Suorin Drop 2 controls it and offers the customary safety measures. The Drop 2 is charged using the included 5V/1A Type-C USB charging connection and cable.

There are no menu options; it is a fixed, plug-and-play vape pod that is easy to use.


The Suorin Drop 2 is an MTL fixed non-adjustable wattage pod that can fire up to 14W at a time and is powered by an inbuilt rechargeable battery with a capacity of 1000mAh. It is made of zinc alloy, has a glossy chrome outer frame, and side panels made of colored IML that guard against scratches.


The Drop 2 is a very small gadget, measuring 78.8mm in height (with the connected pod), 52mm in width, 17.8mm in thickness, and weighing 62 grams. The Suorin Drop 2 is very cozy to grip and has an overall shape and appearance that is reminiscent of a water droplet.

The little control button below the four LEDs does not fire the pod since it is auto draw activated exclusively; instead, it turns the Drop 2 on and off.

Battery LED’s

The gadget will come on after 5 button presses, at which point the 4 white LEDs will count up from 1 to 4 before going off. The same five clicks are required to turn off the gadget, but this time the four LEDs will count down from four to one before going out.

Two fixed tiny pinholes, one on each side of the chrome alloy shell right below the recess for the pod entrance, are used to regulate airflow. Although you may block 1 or both of the airflow holes with your thumb or finger to further limit the airflow to tighten the draw, this fixed airflow offers a semi-tight MTL vape draw.


The Drop 2’s Type-C USB charging connector, which has a 5V/1A rating, is used to charge the internal battery. The charge condition of the battery is visually shown by the four small LEDs. Until it reaches that point, each LED will cycle (slow flash) to indicate around 25% of the battery. The following LED will cycle until all four are static, indicating that the battery is completely charged.

The Suorin Drop 2’s general design is formed like a water droplet, as said, and it has an 8mm outer chrome zinc alloy band that contains the 2 airflow pin holes, the on/off button, the type-c charging connection, and 4 tiny LEDs.


Additionally, the banding has 2 bigger holes on one side that look to be slots for lanyard attachments, however I couldn’t find any information on this and one isn’t included with the kit.

The four tiny LEDs show the internal battery’s condition and will also visually indicate any safety alerts. The “Functionality” section provides a more detailed description of these LEDs.

The two gold-plated spring-loaded control pins that make contact with the coil in the pod when it is installed are positioned in the middle of the rather deep rectangular pod recess at the top of the Suorin Drop 2.

At the extremities of this recess, two pretty big circular magnets and a tiny auto draw sensor are positioned side by side.

Ease of use

The Suorin Drop 2 pod kit has a set single power level of 14W and is extremely uncomplicated and easy to operate. It has a power on/off button but no fire button since it is a draw-activated gadget.

The gadget’s single user display consists of four tiny white LEDs that turn on when the pod is inserted, turn on when you draw on the pod, cycle while the device is charging, and show the battery level when you draw on the pod.

Pressing the little control button five times quickly in succession turns on the Suorin Drop 2. As you count up from the bottom to the top, each of the four white LEDs will turn on one at a time. Again, hitting the button five times turns the Drop 2 off. This time, the four LEDs will count backward.

Inserting the pod will turn on the Suorin Drop 2’s 4 LEDs once if it is switched on. Do keep in mind that just the necessary LEDs will turn on once if the battery’s remaining capacity is below 75%.

Mesh Coils

An integrated 1.0 ohm mesh coil is included inside the pod that comes with the kit. As we’ve previously indicated, the coils on the pod cannot be changed; as a result, when a coil degrades, the pod must be discarded and a new one installed.

Due to the smaller wicking ports in the coil and the lesser power (wattage) employed, nicotine salts with a PG/VG ratio of 50/50 are advised for most MTL vape pods.

When using a brand-new pod, I advise filling it with e-liquid and letting it sit for 10 to 15 minutes before using it to enable the e-liquid to soak into the wick.

Battery Life

You receive over two days of usage from a fully charged battery while using the 1.0 ohm pod. Given that the internal battery has a 1000mAh capacity, the battery life is excellent. The length of the pull and how often you vape will affect this time.

With each LED indicating around 25% of the charge remaining, the four LEDs’ battery status signal seemed to be rather accurate. The amount of charge left will be shown via a drawing on the pod. You must recharge the battery after the LED flashes three times and you can no longer smoke.

Recharging the battery through the Type C 5V/1A charging connector only takes around 60 minutes to obtain a full charge. The Drop 2 allows you to smoke while it is charging because to its “Pass Thru” feature.


  • 3.7mL Pod Capacity
  • 4 LED Battery Indicator Lights
  • Integrated 1.0ohm Coil
  • Bottom Fill System – Silicone Stoppered
  • Draw-Activated Firing Button
  • Max. Wattage Output: 14W
  • Hidden Side Button
  • Airflow Switch
  • Integrated 1000mAh Battery
  • Type-C USB Port
  • Zinc-Alloy Chassis Construction
  • Dimensions – 78.8mm by 52mm by 17.6mm
  • Magnetic Pod Connection

Package Contents

  • 1 x Drop V2 Pod System
  • 1 x Drop V2 Pod
  • 1 x Type-C Cable
  • 1 x User Manual

internalTags:metax : nodesc : ppc0 : xnipsVHard: xnobodylinks : xline0012272022 : VSEX0012272022

Compare items
  • Total (0)