- 38% Vandy Vape Mato RDTA Vape Tank | 24mm 5mL

Vandy Vape Mato RDTA Vape Tank | 24mm 5mL

Add your review
Add to compare
  • This cheap deal for the VANDY VAPE MATO RDTA TANK or lowest price was obtained on August 29, 2021 1:51 pm. Cheapest price found at sourcemore.com where you can purchase this vape at a low price of $30.99, which is 23% less than the cost at Provape ($39.99).
  • Check the price panel to see more cheap vaping deals and pick a preferred e-cig vendor.

$ 31

Cheapest Vape Deal at: sourcemore.comsourcemore.com
Buy for best price
Vandy Vape Mato RDTA Vape Tank | 24mm 5mL
Vandy Vape Mato RDTA Vape Tank | 24mm 5mL

$ 31

Description

Vandy Vape Mato RDTA Tank

Vandy Vape has released the Mato, a new RDTA with a 24mm diameter and BF capabilities. This bottom-feed capable RTDA features a more leak-resistant construction and an updated mixed air intake system, all while maintaining the easy-to-use construction experience we’ve come to expect. The Mato’s construction deck is postless, with two terminals placed at the bottom with gold-plated hex screws. A silica gel stopper is fitted under the top cap of the single fill port to prevent leakage while you’re on the go. It’s as simple as inserting the bottle’s nose into the given port to start the filling process. The five stainless steel braided wicks provided are to be used with the various big wicking apertures. These braided wicks should be used with your preferred organic cotton of excellent quality.

Performance & Airflow

A pair of Ni80 Tri-Core fused Clapton coils with a resistance of 0.26 ohms and an inner diameter of 3.5mm are included in this box. A coil lead guide is included with the Mato to guarantee that your favorite high-performance coils are always trimmed to the proper height. The Vandy Vape Mato RDTA features a 5ml tank capacity and has a polycarbonate glass tank portion as well as a replacement clear glass portion.

The Mato has an improved mixed air intake system with a notched rotating top cover that can be adjusted. This connects to thirteen internal air openings with a 1mm ID on each side, assuring direct contact with the coils and optimum flavor. A regular 24K gold plated 510 contact and a 24K gold plated squonk pin are included in this kit. A pre-installed 10mm bore 810 ULTEM drip tip and a 510 Drip Tip adaptor come included with the Mato. The Vandy Vape Mato 24mm BF RDTA is a fantastic improvement that combines modern technologies with an easy user interface.

The Vandy Vape Mato RDTA has four internal steel wires for amazing juice flow, an easy coil building system, a 510 and standard squonk connection, robust construction, single coil builds, a huge build space, and a 5mL juice capacity with an easy refill mechanism.

Specifications & Features

This all-in-one dripper and rebuildable tank atomizer weighs 155 grams and measures 46mm by 24mm. When used as an RTA, the juice capacity is a respectable 5mL, and refilling is a breeze thanks to the top fill mechanism. To fill the juice reservoir with e-liquid, unscrew the top cap. The Vandy Vape Mato RDTA is made of PSU (Polysulfone), a quality plastic that ensures rigidity and stability. Furthermore, this material is long-lasting, stain-resistant, and heat-resistant, making it ideal for constructing an atomizer, build, or tank.

When you look at the Mato for the first time, you’ll discover four distinct steel wires inside the juice reservoir. This is how Vandy Vape developed the RDTA to provide the finest possible juice flow and avoid burned puffs.

Coil Building

The postless build deck only supports a single coil construction, which is kept in place by two screws put on the device’s exterior top side. This innovative coil tightening method creates more build space, allowing for a simple coil installation process. A profusion of airflow holes surround the coil on both sides, all of which are strategically placed to guarantee that the coil is hit directly. Airflow is regulated by two side air intakes that may be adjusted.

Matte black, frosted grey, stainless steel, gold, and gunmetal are offered in Mato’s semi-gloss finish. The drip tip appears to be constructed of resin and is dependent on the RDTA’s body finish. A Vandy Vape Mato RDTA, a bag of spare parts, a manual, a BF squonk pin, a coil lead guide, and a 0.26ohm triple fused Clapton coil are included with your transaction. It’s worth noting that a normal 510 comes with a pre-installed battery.

The Mato RDTA atomizer from Vandy Vape comes with a gold-plated 510 connection pin as well as a gold-plated BF pin. This means you can use it with whatever squonk modifications you choose. Finally, it has a resin-patterned 810 drip tip with a large diameter.
If you’re searching for a new RDTA with stainless steel mesh wicking, the Vandy Vape Mato RDTA is a great option. It’ll be an excellent vape because to its ease of use, smooth airflow, and overall design.

Specifications

  • Bottom Fed 510 Squonk Connection
  • 5mL Refillable Tank Capacity
  • PSU Tank Material – Protective Cage
  • Collaboration with Nebelfee
  • Single Coil Configuration
  • Postless Build Deck – 2 Drop In Terminals
  • Side Secured via Hex Screws
  • 24mm Diameter
  • Superior Stainless Steel Construction
  • 4 Braided Steel Wire Juice Wicking Structures
  • 810 Resin Drip Tip
  • Side Airflow Control Ring – Honeycomb Airflow
  • Side Fill System
  • Integrated Coil Positioning Guide

MATO Package

  • 1 x Coil Lead Guide
  • 1 x Instruction Manual
  • 1 x Spare Parts Bag
  • 1 x 0.23ohm Triple Fused Clapton Coil
  • 1 x MATO RDTA
  • 1 x Squonk Pin

VR:xnotranx:metax:nodesc:ppc8:xnipsvapecheapvapedna: xnobodylinks : xline006032021 :Linkrefreshall02272021

Price History

-

Reviews (0)

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Vandy Vape Mato RDTA Vape Tank | 24mm 5mL”

Your email address will not be published. Required fields are marked *

Mega Vaper
Logo
Compare items
  • Total (0)
Compare
0