Wotofo Profile M RTA Vape Tank | 24.5mm 3.1-4mL
- This cheap deal for the WOTOFO PROFILE M RTA or lowest price was obtained on June 28, 2022 4:14 am. Cheapest price found at newvaping.com where you can purchase this vape at a low price of £25.99, which is 35% less than the cost at Wotofo ($39.95).
- Check the price panel to see more cheap vaping deals and pick a preferred e-cig vendor.
$ 55 $ 55
Wotofo Profile M RTA Vape Tank
Wotofo’s Profile M RTA is a compacted mesh tank with a small footprint. It stands only 27mm tall and has a 24.5mm overall diameter. It also has a maximum e-juice capacity of 3.1ml with straight glass, which is rather astounding considering its size!
Profile M Capacity
If you desire even more capacity, you could use the bubble glass tank part to boost the total capacity to 4ml. Because of the sliding top fill mechanism, filling this tank takes only seconds.
The Profile M RTA’s reservoir holds a respectable amount of juice and can be refilled by unscrewing the top cover to reveal a convenient filling hole. However, if you use the provided standard, straight glass tube, its capacity is decreased to only 3.1mL, but you gain more mobility in the process.
Despite its simple look, the Wotofo Profile M RTA is incredibly appealing because of its exquisite and timeless design. The top ring also has an incredible etched logo that is guaranteed to turn heads. The atomizer is likewise small, measuring just 24.5mm by 27.8mm, and comes in a variety of colors, including gold, rainbow, blue, blue metal, stainless steel, and black.
The Wotofo Profile M RTA tank comes with a user-friendly construction deck. It’s a deck with a single mesh coil clamp. It’s also compatible with all Wotofo Profile Mesh coils, which is a huge plus.
This is a rather common Profile-styled deck. A clamp mechanism holds your mesh or wire coil in place. Phillips screws have always been used in the clamps, and there is a spring-loaded ceramic block under your coil. The ceramic block is designed to force the cotton higher when it is placed beneath the mesh. In actuality, I believe the spring is underpowered for the job. That ceramic block, from what I’ve observed, becomes maxed out downwards anyhow, especially with the 6mm Wotofo cotton.
When compared to other RTAs, this one stands out because to its one-of-a-kind airflow system. It boasts a top airflow design that can be adjusted to reach the coils directly from various directions. The honeycomb chamber, in combination with this, provides for a smooth draw. Not to add, given the size and airflow design, the flavor is sure to be fantastic!
The top airflow to the construction deck may be adjusted and is achieved by a network of porous honeycomb holes. Because the airflow is directed upwards, air immediately strikes the build deck, resulting in tasty vapor creation. The Wofofo Profile M RTA also has the added virtue of being entirely leak-proof.
This tank comes with three different mesh coils from Wotofo. They’re all the original Profile mesh size, not the larger ones that fit in the Profile 1.5 or RDTA. The old Wotofo mesh, the KA1 nexMESH, and a new (smaller) Clapton Mesh are all available. The first two coils are very common Profile RDA user coils. Clapton’s mesh isn’t actually meshing at all. It’s made up of thin strands of Clapton wire that are framed like a mesh strip.
Whether you like the previous Wotofo Profile Unity RTA or prefer mesh RTAs, you’ll want to check out the Wotofo Profile M RTA. It offers a ton of great features and, as usual, is reasonably priced.
This tank performs admirably. The majority of shorty tanks enjoy this smoke. With such a little stature, this is the first top airflow one. Top airflow tanks are less likely to leak than bottom airflow tanks. However, if the deck is not correctly set up, it may flood. Instead of spilling out the airflow inlets, it will gurgle.
- Single Coil Configuration – Mesh Sheet or Traditional
- Superior Stainless Steel Chassis
- 24.5mm Diameter
- Adjustable Top Honeycomb Airflow
- Pyrex Glass Reinforcement
- Sliding Top Fill System
- PEEK Insulator
- 4mL Bubble Glass Capacity
- Postless Clamp Style Build Deck
- Threaded 510 Connection
- Side Secured via Phillips Screws
- 810 Resin Drip Tip
- 3.1mL Standard Glass Capacity
Profile M Includes
- 1 x Profile M RTA
- 3 x 6mm Cotton Strip
- 1 x 0.18ohm Mesh A1 Coil
- 1 x Bending Tool
- 1 x 0.15ohm Clapton Mesh Coil
- 1 x 4mL Bubble Glass
- 1 x Accessory Bag
- 1 x Cross Head Screwdriver
- 1 x User Manual
- 1 x 810 Drip Tip
- 1 x 0.13ohm nexMesh A1 Coil
VR:xnotranx:metax:nodesc:ppc6:xnipscheapvapingcabinhealth : xnobodylinks2 : xline005312021 : Linkrefresh005312021: saspricerefresh005312021