SMOK Mag P3 Mini Mod Starter Kit | 80W TC
- Cheap vaping deals available at Breazy, Myvpro, Vapordna, Eightvape, Vapormo.
- Cheapest price found at breazy.com where you can purchase the SMOK Mag P3 Mini 80W Starter Kit at a low price 44.99, which is 33% less than the cost at Vapormo ( 66.99).
- This cheap deal for the SMOK MAG P3 MINI 80W STARTER KIT WITH TF SUB OHM TANK lowest price was obtained on February 14, 2021 2:50 pm.
$ 80 $ 80
A Visually Stunning Mod with Exceptional Performance
SMOK Mag P3 Mini Mod Starter Kit
The SMOK Mag P3 Mini Mod is an innovative mod from the well-known vape manufacturer SMOK. It relies on a 3000mAh built-in battery for its operation. It doesn’t have any LED lights. It has a design that mimics the handle of a gun. In addition, the fire button resembles a trigger while the battery housing thrusts out of the bottom similar to a gun’s magazine. The mod addresses the preferences and needs of every vaper since it is available in 25-color options and versions for right and left-handed individuals are available as well. The SMOK Mag P3 Mini Kit consists of one Mag P3 Mini 80W Box Mod, one TF tank, one Spare Glass Tube, One 0.15ohm V2 S1 Mesh Coil, one Spare Parts Bag, one MicroUSB Cable, one 0.15ohm V2 S2 Quad Coil, and one Instructional Manual.
Shape and Modes
The SMOK Mag P3 Mini Mod boasts an ergonomic shape that fits well in the hand. It also feels nice to hold. It also has several modes such as temperature control for Ti, Ni200, and SS, TCR Mode, and smooth/normal/strong pre-heat options.
Huge, Bright, and Clear Screen
The SMOK Mag P3 Mini Mod has a full-color HD OLED Screen that is big, bright, and clear. You can set to six distinct color schemes ranging from purple, red, brown, green, blue, to silver. The menu on this breathtaking screen shows vaping data, including wattage, battery bars, resistance, mode, puff time, and so forth, all in an HD OLED display. Below the display, you will find two adjustment buttons that resemble the parallelograms and bears the matching color scheme like the mod itself.
The mod has numerous protections, including short circuit protection, over discharge protection, and overheating protection, to ensure your safety and that of your vape mod. It has a USB port for charging and firmware upgrades.
The SMOK Mag P3 Mini Mod features a centered 510 connector that can support up to 30mm atomizers without overhang. The performance of the mod remains topnotch even when you switch from one atomizer to another.
Responsive Fire Button
The innovative mod lacks any button rattle. It features a large, responsive fire button that adopts a trigger-like shape. The button feels nice on your finger, and it is pleasurable to use. If you want to activate the mod, click the fire button five times. Three extra presses of the fire button take you to the three-vaping modes: wattage mode, temperature mode, and memory mode. The unique buttons of the SMOK Mag mod allow you to access a particular adjustable feature without holding of buttons or waiting for too long.
The SMOK Mag P3 Mini Mod is a gun-inspired mod that offers unparalleled vaping performance, ideal for a wide array of vapers. It has a comfortable grip and suitable for fans of chain vaping. The magnificent OLED screen is one of the highlighting features that make this device worth purchasing.
- Dimensions – 82mm by 58.5mm by 35.1mm
- Integrated 3000mAh Rechargeable Battery
- Wattage Output Range: 1-80W
- Voltage Output Range: 0.5-9V
- Resistance Range: 0.10-2.5ohm
- Firing Speed – 0.001s
- Zinc-Alloy Chassis Construction
- Rubberized Outer Coating
- IP67 Protection – Water Proof Resistant, Dust, Shockproofing
- Intuitive Firing Button
- Two Adjustment Buttons
- 0.96″ TFT Display
- Low/High Battery Protection
- Low/High Resistance Protection
- Short-Circuit Protection
- Temperature Protection
- 10S Overtime Protection
- Micro USB Port
- Threaded 510 Connection
- Available in Red-Black, Blue-Black, and Grey-Black
SMOK TF Sub-Ohm Tank Features
- 25mm Base Diameter
- 30mm At Widest Point
- Weight – 75g
- 6mL Maximum Juice Capacity – Convex Glass Extension
- Superior Stainless Steel Construction
- High-Grade Glass Reinforcement
- High-Temperature Resistant – Explosion Proof
- TF Tank BF Coil Technology
- 0.25ohm TF BF-Mesh Coils – rated for 30-80W
- 0.5ohm TF Ceramic Coils – rated for 30-60W (Sold Separately)
- Plug-and-Pull Design
- Convenient Top-Fill Rotary Design – Lock Button Mechanism
- Massive Dual Adjustable Airflow Control at Base
- 810 Cobra Resin Ultra-Wide Drip Tip
- Plug-Pull Coil System
- Antibacterial Medical Cotton
- 510 Connection
- 1 x MAG P3 Mini Mod
- 1 x TF Tank
- 2 x 0.25ohm TF-Tank BF-Mesh Coil
- 1 x Silicone Bulb Glass Protective Sleeve
- 1 x Glass Tube Replacement
- 1 x USB Cable
- 1 x User Manual