SMOK Alien Mod 220W TC Box Mod by SMOKTech – DISC

SMOK Alien Box Mod

The SMOKTech SMOK Alien box mod will awaken you to a new side thanks to the plethora of settings the box offers.  This advanced mod is great for anyone looking to put a little kick in there vape game.  It’s capable of tons of power and includes lot of adjustments to play with.

Smoktech has created a stunning little box.  It has a large OLED display gives you great visibility. In other words, there are no problems with readability. The trigger switch system is convenient and easy to use.

It comes in a wide array of colors including Gold, Red or Black. On the rear of the box mod is a carbon plate design which complements its unique appearance.  The trigger switch on the side is easily accessible because it is tall.  Lets take a look at the SMOKTech SMOK Alien box Mod.

Alien Mod Battery Compartment

The battery door is made of aluminum and the two nipples used for closing the door. This box operates on two 18650 batteries in series for maximum power and autonomy. The batteries are inserted from the bottom and the direction is displayed in the hatch. However, if you make a mistake, the box will not power up. It is equipped with reverse polarity protection.

SMOK Alien Screen

Its screen is magical, super retro illumination and a huge readable surface.

In the Puff setting you can restore the number of puffs you have pulled and set the maximum number of inhalations per day. During inhalation, the duration of the show appears on the screen.

In settings, you can adjust the brightness of the screen, turn it off during sessions. You will also be able to update the chipset.

External Mod Features

The small USB port on the front, in addition to the update feature, is programmed to be able to recharge the batteries in your unit. We personally prefer to recharge through an external charger to make sure that each unit’s load is done properly.

The SMOKTech SMOK Alien Box Mod thread pin is 510 and great quality and the spring pin of the brass promises a “flush” with any type of RDA or RBA. Compatibility of the diameter is at most 25 mm.

There is a case in the box that shows the front box model. The contents of the box and the product specifications are listed on the back.

In addition to using two batteries that always work together and recharged at the same time, while ensuring that they have the correct discharge capacity, we do not have any particular recommendation for this box.

With a great deal of processing, the 220 watts displayed on the screen, the box was reactive and did not heat up.

Temperature control is fairly accurate in the three wire types it takes into account. No variation was found or even wattage state. For use between 40 and 80 watts, we did not have to change the batteries of the day, proving a remarkable autonomy, rather than an electronic and a screen that seems to consume energy.

SMOK Chipset

Smoktech spoiled us with this little box. A chipset that is also complex if you want to go with the plethora of settings it offers such as memory functions, and just if you only stay in wattage or TC classic mode.

Its ergonomics are really top notch and the trigger switch is very sturdy. With a clearomizer at 25 mm will be flush, then or much RDA or RTA at 24 mm will fit flush.

The Alien Kit consists of Alien 220 mod, Alien maximum power can up to 220W. Alien 220 box mod can support VW and TC mode.

The clear and precise OLED screen offers an entirely new operation interface. More vaping data for you, such as VW/TC MODE, vaping effect, voltage, battery life, resistance value etc.

SMOK Alien Mod Specifications

– Wattage Range: 6w – 220W in 0.1W increments
– 0.1Ω – 3.0Ω in Variable Wattage Mode
– 0.06Ω – 3.0Ω in Temperature Control Mode
– 200-600F/100-315C Temperature Range
– Temperature, Wattage, and Memory Modes
– Temparature Mode Compatible w/ Ni, Ti, SS
– Adjustable OLED Display
– Zinc Alloy Material Construction
– Bottom-Hinge Battery Cap
– Upgradeable Firmware via Mini USB
– Series Connection
– 510 Threading

INFO:tranxppc1