Steam Crave HADRON PLUS DNA250C Box Mod
Utilizing EVOLV’s DNA250c chip-set, the Steam Crave Hadron Plus offers a power range of 5 to 200 watts with the best power efficiency in the market. Together with Boost Mode and Replay, the DNA250c chip-set also enables precise and broad temperature management. Almost every coil construction, from small, precise temperature control to big, exotic coil builds, pairs well with the Hadron Plus.
Similar to its sister box, the Hadron Pro box, Steam Crave offers an electrical device that is outfitted with the greatest chipset for seasoned vapers. The two 21700 batteries are suggested by the Hadron Plus DNA 250 for autonomy and power.
The polyvalent Hadron Plus DNA250C may utilize two of your preferred batteries, including 18650, 21700, or 21700.
The DNA 250C chipset by Evolv is the solution Steam Crave suggests for controlling all the Hadron Plus’s potentials. You may see all the required information on the 0.9-inch colored screen. For assembly, the DNA250C has a power output of 200 W. Additionally, it controls a variety of modes and features, including Replay, Boost (for watts), and Temperature Control for various resistance wires. Coils between 0.1 and 3.0 mm are supported by the Hadron Plus DNA 250C.
Three distinct colors are available for the Hadron Plus, which is built of zinc alloys. For big atomizers, like as the Ragnar RDTA by Steam Crave, which has a huge screen of 35mm, it features a very large 510 connector.
The USB-C connector and cable are used to power the Hadron Plus DNA 250C, which has a 2A recharge capability.
The company Steam Crave produces the Hadron Plus DNA 250C.
The Steam Crave Hadron Plus DNA250C mod, double 21700 battery (not included), and long-lasting usage of this device increase its durability. The battery door is very simple to access and shut. One button controls the ultra-fast adjustable wattage, which can produce up to 200W to provide your preferred flavor performance.
The Steam Crave Hadron Plus DNA250C mod, twin 21700 battery (not included), and long-lasting usage of this device increase its durability. The battery door is very simple to access and shut. One button controls the ultra-fast adjustable wattage, which can produce up to 200W to provide your preferred flavor performance. Utilizing the DNA 250C chipset, which has three effective vaping modes—Replay Mode, Watts Boost Mode, and Accurate Temperature Control—it influences functioning. You won’t have to worry about significant dents and scratches because to the sturdy metallic material, and you’ll like it for its distinctive square design and cozy ruggedness.
Ease of use
The Steam Crave Hadron Plus DNA250C Vape Box mod extends the life of this device, has long-lasting usage, and is simple to access and shut the battery door. It is powered by two 21700 batteries (not supplied). With only a single button, the ultra-fast changeable wattage demonstrates how easy it is to use, providing performance of up to 200W for your preferred taste. packed with a USB charging port that is accessible for onboard charging that uses fast charging technology to provide you a quick charge and mobile usage.
Utilizing the DNA 250C chipset, which has three effective vaping modes—Replay Mode, Watts Boost Mode, and Accurate Temperature Control—it influences functioning. When in Replay Mode, the kit is sophisticated enough to choose the optimum puff for you; nevertheless, if you desire an exceptional taste at a high wattage, Watts Boost Mode is the finest option. To prevent the coil from becoming too hot, the precise temperature control mode is advantageous. You are fully protected from any dangers thanks to the Poor Resistance Protection, Onboard Negative Polarity Safeguards, Atomizer Protection, Short Circuit Protection, Excessive heat Protection, and Undervoltage Step-Down Protection.
- Resistance Range: 0.1-3.0ohm
- Wattage Output Range: 1-200W
- 0.9″ TFT Color Screen
- Atomizer Protection
- Two Adjustment Buttons
- Type-C USB Port
- Accurate Temperature Control Mode
- Voltage Output Range: 0.2-8.0V
- Magnetic Battery Door
- Intuitive Firing Button
- Replay Mode
- Short Circuit Protection
- Dimensions – 98mm by 58mm by 34mm
- Mode Selection Button
- Watt Boost Mode
- Low Voltage Protection
- Overheat Protection
- Temperature Range: 200° – 600°F
- DNA250C Chipset
- Low Resistance Protection
- Reverse Polarity Protection
- Aluminum Alloy Chassis Construction
- Threaded 510 Connection
- Dual High-Amp 18650/20700/21700 Batteries – Not Included
- 1 x Steam Crave Sticker
- 2 x 18650 Adapter Sleeves
- 1 x HADRON PLUS DNA250C Box Mod
- 1 x User Manual
- 2 x Battery Wrap
- 1 x USB Connection Cable
metax : nodesc : ppc0 : xnips : xnobodylinks : xline0012102022 : VSEX0012102022