Experience a Wonderful Sub-ohm Vaping and unrivaled Flavor with the Dovpo Topside Dual 200W Squonk Mod
Dovpo Topside Dual 200W Squonk Mod
The Dovpo Topside Dual Squonk Mod is the newest vaping device from Dovpo. This exceptional dual-18650 squonk mod fires up to 200 watts. It has a decent sized black and white display on the front and features a top-fill design. It comes in 8 distinct color configurations, with all of them colored black on the top and base. These colors include black, red, purple, gunmetal, green, blue, silver, and red.
Great Build Quality and Lovely Design
The Topside Dual is a charmingly built and creatively designed squonk mod that fits and feels nice in the hand. It is a bit large and heavier than most of the two-battery squonk mods out there. It has an ergonomic design that allows you to involve your middle as well as ring fingers in the squonking activity. The device is well finished and doesn’t feel cheap at all. It has sturdy fill cap with wonderful knurling texture for easy unscrewing and screwing. It is seamlessly machined with no signs of button rattle.
Dovpo 510 Pin
The squonk mod has an excellent 510 pin that works well with a broad range of attys. The 510 platform can hold an Atty measuring 25 mm in diameter quite effortless and with no overhang.
Top-filled Squonk Port
The top-filled squonk port is the most defining feature of this mod. The squonk bottle is extremely easy to refill – just unscrew the knurled top cap and pull it up and off to expose two fill ports. The fill ports are decently sized, and it can accommodate both nozzles and droppers. The cap offers a comfortable and leak-free fit since it is spring loaded. Below the fill cap are two rubber linings that completely seal the squonk refill section and thwart leaking.
Massive Squonk Bottles
The Dovpo Topside Dual Squonk Mod has huge squonk bottles capable of accommodating 10ml of vape juice per bottle. The squonk bottle is easy to remove, but you will hardly have to do it.
Topside 96-Inch OLED Screen
The intuitive 0.96-inch OLED Screen is black and white, easy to read, and extremely crusty. It displays all the important vaping data in a vertical arrangement. The displayed information includes output mode, output wattage, atomizer resistance, output current, battery life, and resistance.
Conveniently Located Buttons
The squonk mod relies on three buttons for all its operations. It has one huge and sturdy firing button and two clicky wattage buttons. The huge fire button sits on top of the mod, and it is round and protruding. The wattage buttons, on the other hand, are tiny and round as well. The wattage buttons are easy to access and operate since they are situated almost at the foot of the device.
Equipped with an atomizer resistance of between 0.08 ohm and 3.5 ohm, the Dovpo Topside Dual 200W Squonk Mod is a great device for flavor chasing as well as sub-ohm vaping. It features a complete temperature control set that can support usage of stainless steel, nickel, and titanium wire. It also features a TCR mode for experienced vapers.
- Easy-to-use 0.96” OLED Screen
- BYPASS Mode
- Leak Resistant 510 Base
- Large Rounded firing button
- Two Navigation Buttons
- Size 88.5 mm x 54mm x 42mm
- Range: 100-315°C/200-600°F
- Stainless Steel
- TC Mode [Requires Firmware Upgrade]:
- Micro USB port
- Power Mode
- Voltage Output Range: 1.0v-12v
- Zinc Alloy Construction
- Slide to open Bottom Battery Door
- Easy Top-Fill Squonk Bottle
- 10mL Silicone Squonk Bottle
- Gold-plated spring loaded 510 pin
- Wattage Output Range: 5w-200w
- Resistance: 0.08 ohm – 3 ohms
- 1 x Spare Parts Bag
- 1 x Micro USB Cable
- 1 x Battery Usage Warning Card
- 1 x User Manual
- 1 x Dovpo Topside Dual 200w Squonk Mod
- 2 x 10mL Squonk Bottles (one pre-installed)
INFO:metax:contup::ppc8:ppcin5: xhasbodylinks : xline005242021 :