- 42%
SKU: MVIG86WT6 Category: Tag:

WOTOFO Profile 1.5 RDA | 24mm | Mr.JustRight1

Add to wishlistAdded to wishlistRemoved from wishlist 0

$ 25


WOTOFO Profile 1.5 RDA

The WOTOFO Profile 1.5 RDA is a rebuildable drip atomizer that is upgraded from the WOTOFO Profile RDA to provide stronger and richer flavors. The Profile V1.5 RDA has a 22.5mm build deck diameter designed for vapers looking for a bigger build profile and has a 24mm outer on the RDA. The larger mesh coil build deck allows for stronger flavor production when compared with the original Profile RDA.


The juice wells on the WOTOFO Profile 1.5 RDA are deep and leak resistant. The larger deck build and larger mesh surface area allow for thicker vapor production from every pull and make for a better vaping experience. Maintaining the original Profile RDA’s ceramic support design with clamp securing method, the Profile V1.5 RDA is even easier to build on than the predecessor and ensures proper contact between the cotton wick and mesh. The use of the spring-loaded ceramic design also pushes the cotton wick into place and prevents burnt juice and overheating. Built with superior 304 stainless steel, the Profile V1.5 RDA is built with durability in mind. The sides are secured in on the RDA with Philips screws, allowing for easy tightening and removal for builds.


The Profile 1.5 RDA allows for a customizable and flexible experience regarding airflow. The lower air supply gives off warmer vapor while the max air supply pushes all the air holes open and directs air straight to the mesh’s top resulting in a powerful vapor stream. A third setting, the flexible air supply option allows you to set the airflow horizontally and control it from minimum to maximum settings. With three included coils in the nexMESH CHILL, nexMESH TURBO and nexMESH EXTREME, you can choose from a mellow flavor experience to a warmer experience, to a fully flavored experience.


The WOTOFO Profile 1.5 RDA has a single mesh coil configuration and works with the Wotfo nexMESH series of coils. The use of single mesh coils provides for quick heating and enhancement of the e-juice flavor. Coming with three nexMESH coils, you will receive the 0.15ohm nexMESH Chill A1, the 0.13ohm nexMESH TURBO A1 and the 0.16ohm nexMESH EXTREME A1. The RDA is compatible with and comes with an 810 resin low profile drip tip and has a threaded 510 squonking bottom feed pin that allows for convenient and easy pushing of e-liquid straight to the wick and use with squonk-style mods as well as regular mods.


Atop the WOTOFO Profile 1.5 RDA you will find an adjustable bored airflow control top cap that includes 3 control settings to give you customization options for airflow.


German PEEK insulators are used in the WOTOFO Profile 1.5 RDA. German PEEK insulators are some of the best in the industry and have improved efficiency in insulation.


  • RDA Type: Mesh RDA
  • RDA Body Diameter: 24mm
  • Build Deck Diameter: 22.5mm
  • Coil Configuration: Single Mesh Coil
  • Wattage Range: 60-80W
  • Recommended Wattage: 70-75W
  • Overall Height: 33.1mm (with drip tip and 510 pin)
  • Threading: 510 Thread
  • Body Material: Stainless Steel
  • Juice Feeding Method: Drip / Squonk
  • Insulator Material: German PEEK

Profile 1.5 Package

  • 1pc Profile 1.5 RDA
  • 1pc User Manual
  • 1pc Extra Drip Tip
  • 1pc Bending Tool
  • 1pc Accessory Bag
  • 1pc Allen Key
  • 1pc Cross Head Screwdriver
  • 3pcs 6mm Thick Xfiber Cotton Strip
  • 1pc nexMESH CHILL A1 0.15ohm
  • 1pc nexMESH TURBO A1 0.13ohm
  • 1pc nexMESH EXTREME A1 0.16ohm



User Reviews

0.0 out of 5
Write a review

There are no reviews yet.

Be the first to review “WOTOFO Profile 1.5 RDA | 24mm | Mr.JustRight1”

Your email address will not be published. Required fields are marked *

Compare items
  • Total (0)