Lost Vape Grus Box Mod | 100w Vape

Lost Vape Grus Box Mod

The Lost Vape Grus Mod 100W is a high-end box mod noted for its great quality construction and good chipset performance. Grus Mod’s chassis is made of tough but light zinc alloy which is incredibly sturdy and promises to be long-lasting. Grus Box Mod is powered by your choice of a single 21700,20700, or 18650 battery and by utilizing an 18650 battery adaptor. It also has a Type-C port built-in. When you plug in the USB-C connection to a power source, the battery icon will start to animate and will stop once completely charged. You may use this mod in the variable wattage mode, variable voltage, or temperature control mode. It is easy to switch between modes thanks to the large display screen and intuitive buttons.

Firing Modes

In Temperature Control mode, the Grus Vape Mod fires the coil between 100°C and 300°C. The power output in Variable Wattage mode fires up to 100 watts. The output voltage in variable volt mode can fire up to 7V. All of the critical operational parameters are displayed on the built-in 0.96 inch TFT screen display. To change the color theme, easily press and hold the choose button in the center of the plus and minus button for 2 secs. The 510 connection on this mod can fit tanks with a diameter of up to 30mm.

Battery

The Grus mod is the newest addition to the Lost Vape Quest lineup, and it’s a single 21700, 20700, or 18650 battery mod that can fire up to 100W. It offers Temperature Control modes for SS316, Titanium, and Nickel in addition to VW and VV modes. These designs are more affordable models released by Lost Vape.  So there the standard DNA chip has been removed.  Instead, the Lost Vape Grus Mod has employed their own Quest chip, which is similar to what is offered in their Thelema and other pod systems.

Conceptualization

A massive stainless steel 510 plate sits on top, with no overhang, can support atomizers up to 30mm in diameter. A circular firing button and a 0.96” color screen may be found on the mod’s front. The up, select, and down buttons are located below the screen. Finally, at the bottom of the front panel is a USB C charging connector. Outside, the display is clear, sharp, and bright enough to see.

A battery is inserted at the bottom of the Lost Vape Grus Mod. It has a circular screw-out cap with a fold-out tiny handle for unscrewing the cap. On the battery cover, there are three battery venting holes. A positive indication is carved onto the positive contact in the mod. Even when using an 18650 battery with the provided adaptor, there is no battery wiggle or movement with a battery inserted.

Characteristics

The battery indication is on the top left, the resistance is on the top right, the puff counter is on the right towards the bottom, and the time in seconds of the last puff is on the bottom towards left. Colored squares run down the bottom of the screen to indicate the selected color theme and other options on the Lost Vape Grus mod. The mode you’re in will be displayed in the middle of the screen, along with the specified set wattage, a voltage, or temperature set for that mode.

Specifications

• Check Atomizer Protection
• Wattage Output Range: 5-100W
• Type-C USB Port
• TC Mode
• Low Battery Protection
• Zinc-Alloy Chassis Construction
• Temperature Range: 200°-600°F / 100°-300°C
• Power Mode
• Two Adjustment Buttons – 1 Select Button
• Nickel, Stainless Steel, and Titanium Wire Compatibility
• Short Circuit Protection
• 0.96″ TFT Color Screen
• Temperature Protection
• Intuitive Firing Button
• Voltage Output Range: 0.8-7.0V
• Threaded 510 Connection
• Single 21700/20700/18650 Battery – Not Included
• Dimensions – 94.6mm by 40.5mm by 30.5mm
• Bottom Threaded Battery Cap
• Resistance Range: 0.1-5.0ohm
• Vaping Overtime Protection

Grus Vape Package

• 1 x User Manual
• 1 x GRUS 100W Mod
• 1 x Type-C USB Cable
• 1 x Warranty Card

VR:metax:nodesc:ppc11: : xnipsvaperverse: : xnobodylinks : xline005292021 : Linkrefresh005292021: saspricerefresh005292021