Serpent Elevate RTA by Wotofo & Suck My Mod | 24mm
- This product is available at Wotofo, Vapormo.
- At wotofo.com you can purchase Wotofo Serpent Elevate RTA for only 24.95, which is 45% less than the cost in Vapormo ( 44.99).
- The lowest price of WOTOFO SERPENT ELEVATE 24MM RTA ATOMIZER was obtained on January 23, 2021 8:00 pm.
$ 32 $ 32
The Innovative Serpent Elevate RTA by Wotofo & Suck my Mod/24mm is set to transform the Vaping World
Wotofo Serpent Elevate RTA
Serpent Elevate RTA is the result of an ambitious partnership between Wotofo and Matt from the globally known ‘Suck My Mod’ YouTube Channel. The innovative mod consists of wonderful features like a GTA style deck, four airflow slots that supply quality air to the single coil build in the middle, and ambidextrous coil clamps.
The RTA features a 3.5ml standard capacity bottle with the possibility of advancing to a 4.5ml bubble glass. With its 6 color schemes, from black, gunmetal, rainbow, SS, blue, to gold, Serpent Elevate RTA meets the personal preferences of almost every vaper. When you buy this product, you will get one Serpent Elevate RTA, one Frosted 810 Drip Tip, one Bubble Glass, one bag of Spare Parts, one 510 Drip Tip Adapter, two 0.33ohm Framed Staple Clapton Coil, one User Manual, and one pack of 3mm Agleted Cotton Strips.
Creatively Designed and Machined
Serpent Elevate RTA is a product of creativity and commitment to deliver a quality vaping device to vapers. It adopts a top airflow setup to prevent leakage. It features Ultem drip tip with a 510-sized connection at the base together with two O-rings to tighten it onto the atomizer’s stainless steel top cap. The top cap comes off easily – just unscrew it. Under the top cap, you will meet two decently sized filling holes that allow you to refill your reservoir using needle tip bottles, unicorn bottle tops, and even glass droppers.
The chamber in the tank is constructed using stainless steel, and it features inscription of Suck My Mod logo and “Serpent SSM.” The conically shaped barrel allows the RTA to produce excellent flavor.
The RTA has a detachable structure, which makes it easy to pull apart and put together. Due to this detachable nature, this device is super easy to clean and maintain.
Inventive Dual Post Design and Build Deck
The Serpent Elevate RTA has a dual post design, with each post bearing two holes to enable easy installation of both right and left-handed enfolded coils. If you want to be a bit adventurous, you can try a stacked coil build or a twofold vertical build. Each post consists of two built-in airflow slots that provide a fantastic vaping experience that is free of the leak.
Adjustable Airflow Control Ring
The airflow control ring is held in position by two clear O-rings, but it comes off easily to make cleaning the RTA an effortless task. The ring spins approximately a quarter a turn to shift from entirely open to entirely closed. The airflow slots let in an adequate amount of air, which means you can enjoy a lovely, tight MTL draw if you close these slots well.
If you want a single coil RTA that excels in delivering quality flavor and decent vape clouds, then Serpent Elevate RTA would be a wise choice for you. The device is easy to fill – just remove the top cap and reveal huge filling holes. It looks nice, and it has minimal and concealed engravings.
- Production by Wotofo and Suck My Mod
- 24mm Diameter
- 3.5mL Standard Juice Capacity
- 4.5mL Bubble Glass Juice Capacity
- Superior Stainless Steel Construction
- Pyrex Glass Reinforcement
- Elevated Postless, Four Terminals Build Deck
- Side-Secured via Hex Screws – 1.5mm by 2mm Terminals
- German PEEK Insulator
- Single or Dual Coil Configuration
- Dual Slotted Top Airflow – Knurled Control Ring – 11mm by 2mm Slots
- Top Airflow Vents Underneath and Side of Coil
- Decorative Snakeskin Knurling Pattern
- 9mm 810 Resin Widebore Drip Tip
- 810 Frosted Widebore Drip Tip
- 510 Drip Tip Adapter
- Detachable Structure
- Gold-Plated 510 Connection
1 x Serpent Elevate RTA
1 x Coil Trimming Tool
1 x Frosted 810 Drip Tip
1 x 510 Drip Tip Adapter
1 x Bubble Glass
2 x 0.33ohm Framed Staple Clapton Coil – rated for 45-55W
1 x Pack of 3mm Agleted Cotton Strips
1 x Spare Parts Bag
1 x User Manual