- 38% Vandy Vape Berserker Mini V2 RTA | 22mm MTL

Vandy Vape Berserker Mini V2 RTA | 22mm MTL

Add your review
Add to compare
  • This cheap deal for the VANDY VAPE BERSERKER MINI V2 22MM MTL RTA or lowest price was obtained on September 18, 2021 12:08 am. Cheapest price found at newvaping.com where you can purchase this vape at a low price of £28.99, which is 17% less than the cost at Vapordna ($34.99).
  • Check the price panel to see more cheap vaping deals and pick a preferred e-cig vendor.

$ 30

Cheapest Vape Deal at: sourcemore.comsourcemore.com
Buy for best price
Set Lowest Price Alert
×
Notify me, when price drops
Set Alert for Product: Vandy Vape Berserker Mini V2 MTL RTA - $29.89
Add to wishlistAdded to wishlistRemoved from wishlist 1
SKU: MVY2ACTI1 Tags: ,
Vandy Vape Berserker Mini V2 RTA | 22mm MTL
Vandy Vape Berserker Mini V2 RTA | 22mm MTL

$ 30

Description

Vandy Vape Berserker Mini V2 MTL RTA

Berserker Small V2 MTL RTA by Vandy Vape is the upgraded mini version of the Berserker V2 MTL RTA! To enjoy the true MTL experience, it features a smaller adaptation diameter, a freshly expanded replacement metal tube, a complete airflow plug-in, and a simple coil installation technique. It is relatively tiny, with a diameter of 22mm, and it looks fantastic on a variety of current battery modifications. The Vandy Vape Berserker Mini V2 MTL RTA comes with three tank tubes, each with a different capacity. The capacity of the pre-installed glass tube and the extra PEI tube is 2ml. The capacity of the Berserker Mini V2 MTL RTA has been raised to 2.5ml, and a metal tube based on the original Berserker V2 MTL RTA replacement tubes has been added. The twin fill ports on the threaded top cap of the Berserker Mini V2 RTA allow for top filling. To avoid any unintentional opening or leakage, spin the top fill ring to open and close the filling hole.

Version

The atomizer range Berserker is abbreviated as BSKR. The Vandy Vape Berserker Mini V2 is a small version of the normal Berserker V2 MTL RTA. MTL refers to a vaping style that calls for a narrower airflow and higher resistance coils, while RTA stands for Rebuildable Tank Atomizer. The airflow will be more exact on an MTL atomizer than on a DTL atomizer because it is an MTL atomizer. There are two distinct airflow methods to fine-tune your vape to do this.

Build Deck

The twin post single coil build deck on the Vandy Vape Berserker Mini V2 has two terminals. Each post has one terminal. Flathead screws were used to fasten the top. On this deck, the simplest coil installation is performed. The Berserker Mini V2 MTL RTA’s variable airflow, which is controlled by a dual slotted airflow control ring on the side, allowing you to precisely match your draw behavior. All typical hole diameters in the air-tubes are available in eight sizes (0.8, 1.0, 1.2, 1.4, 1.5, 1.6, 2.0, D-1) (inserts). Airflow inserts for the deck are interchangeable and come in eight distinct variations, allowing for a customized experience. Regardless, airflow is consistent throughout, and the throat punch produced by the Berserker Mini V2 RTA is amazing. There are three tubes and three drip tips included in the package for your convenience.

Vape Profile

The airflow will be more exact on an MTL atomizer than on a DTL atomizer because it is an MTL atomizer. There are two distinct airflow methods to fine-tune your vape to do this. A movable control ring on the exterior base of the tank opens and closes the airflow inlets according to your preferences. Removable airflow inserts with diameters ranging from 0.8 to 2mm, as well as a dual-hole for a completely open airflow, are located under the coil on the construction deck. The inserts appear to be replaceable without having to remove the deck’s coil construction. The package comes with eight inserts.

With two posts and clamps for a single coil set-up, the Vandy Vape Berserker Mini V2 deck is quite similar to earlier Berserker versions. The two top fill holes are accessible by a screw-off cover, which is touted to be childproof and leak-proof. As is customary, you can simply change the appearance of the tank by using one of the three tank glass covers included in the kit: a clear one, and Amber color one, and a metal one. In addition, the set includes three different drip tips.

Specifications

  • Interchangeable Deck Based Airflow Outlet
  • Top Secured via Flathead Screws
  • PEEK Insulation
  • 2.5mL Tank Capacity
  • Pyrex Glass Reinforcement
  • megavaper.com
  • Threaded 510 Connection
  • Single Coil Configuration
  • Multi-Hole Single Sided Airflow Control Ring
  • 22mm Diameter
    Quarter Turn Top Fill System – Dual Fill Ports
  • Superior Stainless Steel Tank Construction
  • Optional 2mL Tank Capacity
  • Dual Post Build Deck – 1 Terminal Per Post

Mini v2 Package

  • 1 x PEI Tube
  • 2 x 0.74ohm Superfine MTL Fused Clapton Coil
  • 2 x Drip Tip
  • 1 x Instruction Manual
  • 1 x Berserker MINI V2 MTL RTA
  • 1 x Spare Parts Bag
  • 1 x Metal Tube
  • 8 x Airflow Inserts

VR:xnotranx:metax:nodesc:ppc6: xnipsclickecigsourcevaping :  xnobodylinks : xline006032021 : : Linkrefresh006032021: saspricerefresh006032021 

Price History

-

Reviews (0)

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Vandy Vape Berserker Mini V2 RTA | 22mm MTL”

Your email address will not be published. Required fields are marked *

Mega Vaper
Logo
Compare items
  • Total (0)
Compare
0